can composite decking be used at first floor height candle

How To Clean Your Composite Decking |

Store decking on a flat level surface and always use proper supports (dunnage), Do not store directly on the ground. When stacking decking bundles, supports (dunnage) should start approximately 8" (0.20m) from each end and be spaced approximately 2' (0.61) on center. In addition supports (dunnage) should line up..

How to build a deck with composites | Family Handyman

You can build yourself a low-maintenance deck using the same tools as you would a wood deck, and similar techniques. But there are . Use splice boards to eliminate random splices in long runs. . If your deck is more than a couple of feet off the ground, you may want to wrap the posts in PVC to match the rest of the deck

The 9 golden rules of a professional composite decking installation

UPM ProFi Support Rails can only be used when laid directly on a hard flat surface (eg. concrete): for raised decks, UPM ProFi Large Aluminium Support Rails or timber joists should be used. UPM ProFi Deck should not be installed on open joists on first floor or higher levels. 4. The support rails/joists should be fixed to the..

How to Avoid Common Composite Decking Mistakes

Apr 4, 2017 . Before you choose to do-it-yourself or work with a professional, check out this short list of composite deck building mistakes to avoid when considering . The first mistake that many homeowners make is not taking enough time to plan their new deck. . How (and when) will the deck primarily be used?How to build a raised deck | Ideas & Advice | DIY at B&Q

Raised - not laid on the ground floor; Built on flat, soft and level ground; Attached to a building (or wall) - ignore this section if building independently from a building; Designed with the boards in a horizontal pattern; Fitted with a balustrade made from spindles (balusters); Fitted with decking steps (with options for both timber..

ComFlor manual Composite floor decking design and technical .

metal deck and composite slab. Especially suited to bear on the extended lower flange of a steel beam, can also be used on the top flange. Nestable profile gives low transport and handling costs. ComFlor 225. High performance deep deck specifically designed for Slimdek and all other integrated steel beam systems