plastic wood joist price

Decking - Curtis Lumber Co., Inc. eShowroom

Cedar is cost effective with Redwood, but Redwood heartwood will be slightly higher in cost. Composite decking varies widely depending upon the manufacturer, the profile, and the color. The price of composite materials is more than the softwoods available and less than the tropical..

Plastic Lumber - King County

INTRODUCTION. Plastic Lumber Types. Product Benefits. Purchasing Costs. STANDARDS AND GUIDELINES. ASTM Recycled Plastic Lumber Standards. USAGE HISTORY AND EXPERIENCE .. o Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates -. D2344 / D2344M - 00(2006)

High-Tech Decks | This Old House

Plastic Decking. A E-Z Deck is made of fiberglass and polyester resins. The 1 1/2-by-5 7/8-inch planks snap onto a track that is screwed to the top of the joists. Cost: $5 a linear foot. B Eon's 1 1/2-by-5 1/2-inch board is made from recycled and virgin plastics and fastened down with a T-clip that fits into the side grooves

explanation wood rafters roof slope multipliers . - State of Michigan

WOOD RAFTERS. Cost per square foot includes necessary ties, ridges and bracing. Ceiling joists should be added. For pitched roofs, use the multipli- . Costs per linear foot including sanding and finish. For rough sawn ornamental beams, add 40%. Simulated plastic beams cost $5.50 to $6.50 per linear foot. SIZE. COST

Cedar, Pressure Treated Wood & Composite Decking - The Family .

wood deck. Which is the best decking materialcedar, pressure-treated or composite lumber? We compare their durability, appearance and cost. By the DIY experts . They're all rot resistant to varying degrees, require 16-in. joist spacing for proper support, bleach out to a silvery gray, and can all be cut and installed using..

High-Strength Low-Cost Aluminum Joists and Stringers

Nailer strips, available in either plastic or wood, are flush with the top of the joist and stringer and prevent grout leakage. Wider nailer strip in joist makes nailing of deck easier and quicker. High strength up to 300 lbs. per linear foot at ten-foot spans for joists and up to 635 lbs. per linear foot at ten-foot spans for stringers

Plastic extrusions lumber - recycledplasticbuildingmaterials.co.uk .

Recycled Plastic Tongue and Groove boards or planks leave any wooden T&G product in the dust for longevity and cost of maintenance. . 100 x 50mm Recycled Mixed Plastic is used as bench seating of all kinds, joists and framework on walkways or decking, pathways, balconies, fishing pegs and more. Provides strength..

2-1/2" x 11-7/8" I-Joist at Menards

I-Joists are comprised of solid sawn flanges and structural panel webs that provide strength and versatility. Their lightweight construction, ease of handling, strength and ability to span longer distances result in lower overall labor and material costs compared to solid lumber. Actual Size app. 2.5"x11.875"x16'; 2 ½" solid..

2010 Technical information guide - Ecotech Wood

Made from recycled materials and itself recyclable, EINWOOD is the one and only wood composite to have ... and so should be avoided at all costs. .. Joist span: If using EINWOOD 30mm profiles as the decking material, set the joist pitch to 600mm or less. *Please do not hesitate to consult us at the design stage of your..

Wood Vs. Plastic: Deck Material Comparison - tribunedigital .

May 13, 2000 . You can even get aluminum decking materials. Many of these systems come with accessory railing and trim kits for a truly finished look. Many, if not all, of these products are applied to a traditional treated-lumber joist-and-beam system. This allows for easy cost comparisons, since the structural aspects of..