youngs modulus of pvc piping

Measurement of Poisson's Ratio and Elongation for Polyvinyl .

Measurement of Poisson's Ratio and Elongation for Polyvinyl Chloride (PVC) . Applications include articles of clothing, interiors (cushion materials and heat insulating materials), ropes, wire sheaths,packaging materials, vinyl records, and water & sewer pipes. In this report, strain is chosen as an example of a physical..

Mid-States: CPVC Physical Properties - Midco Supply

Tensile Modulus (psi), 73°F, 430,000, ASTM D-638. Flexural Strength (psi), 73°F . CPVC Schedule 80 threaded fitting, Specifications for threaded fittings and pipe. specifications . STANDARDS. ASTM D1784 - Rigid PVC Compounds, ASTM D2855 - Standard practice for solvent cemented joints for PVC pipe and fittings

Effects of strain rate and temperature on tensile properties of CPVC .

Oct 19, 2016 . Full-text (PDF) | In this study, crosshead speed and temperature dependence of tensile properties of CPVC pipe material is investigated. Standard ASTM tensile specimens are used. Temperatures . modulus of PVC increased with increasing crosshead. speed. They have also, shown that the yield strength

Physical Properties of mPVC over Time | SpringerLink

Abstract. It is known that plastics, in particular PVC and mPVC, experiencechanges in properties over time. The tensile rupture strength andelastic modulus are known to decrease with time. The design stresses anddeflections of PVC pipe therefore need to account for the long-termproperties. Laboratory tests indicate that..

PVC (Polyvinyl Chloride)

Flammability PVC is self-extinguishing. Property. ASTM Test Method. Units. PVC. Physical. Density. D 792 g/cc. 1.42. Water Absorption. D 570. %. 0.06. Cell Class. 1784. 12454-B. Rockwell Hardness. D 785. R Scale. 115. Shore Durometer. D 2240. D. 89. Mechanical. Tensile Modulus. D 638 psi. 411,000. Yield Strength

This article appeared in a journal published by Elsevier. The .

Jun 21, 2009 . CaCO3 particles led to a slight decrease in the tensile strength but improved the impact energy, the storage . and yield strength, and can increase cost. . cheap processing of nano-CaCO3 means that this new process has potential applications in commodity applications of PVC such as piping materials

Impact, Bending, Flexural and Compressive Strength Tests On a .

Keywords: Thermplastic, Mechanical Properties, Impact, Compression, Bending, Flexural, Shear stress. Introduction . increasing the tensile strength and modulus . pipes and frames of windows and doors. PVC competes rubber in many applications because of its excellent properties like [1]:. 1. High electrical insulation. 2

PVC Pipe Engineering Properties - North American Pipe

Thermal De-Rating Factors. The Tensile Yield Strength, Hydrostatic Design Basis, Tensile Modulus of Elasticity, and Flexural Yield Strength values in the Mechanical Properties table must be adjusted by using the table below at temperatures above 73°F/23°C. (These factors can also be applied to the related Pressure..

PVC Properties - Vinidex

The elastic modulus of PVC-M is marginally lower than standard PVC-U. Impact Characteristics PVC-O exceeds standard PVC-U by a factor of at least 2 and up to 5. PVC-M also has greater impact resistance than standard PVC-U. Impact performance tests for PVC-M pipes focus on obtaining a ductile failure characteristic

Effect of temperature on tensile properties of HDPE pipe material .

The deformation at room and high temperatures is accompanied by considerable necking. The temperature effect on the tensile properties of PE-100 pipe material is compared with that of CPVC and PVC pipe materials, used in comparable applications. In general, a similar effect was observed on yield stress, modulus of..

Report No. R 89-6, Mechanical Properties of PVC Well Screen and .

Tensile, collapse, and stiffness tests were run on two manufacturers' Schedule 80 and Class. 200,8- and 12-inch-diameter . DESCRIPTORS-- mechanical properties/ plastic pipe/ well screen/ well casing/ pipe/ pipe joints/ tensile strength/ collapse/ ... Young's modulus = 400,000Ib/in2*. U = Poisson's ratio = 0.36*

Polyvinyl chloride - Wikipedia

Polyvinyl chloride also known as polyvinyl or vinyl, commonly abbreviated PVC, is the world's third-most widely produced synthetic plastic polymer, after polyethylene and polypropylene. PVC comes in two basic forms: rigid (sometimes abbreviated as RPVC) and flexible. The rigid form of PVC is used..

Physical Properties of PVC & CPVC Pipe - PVC Pipe Supplies

Poisson's Ratio @ 73°F. 0.410. 0.386. Hazen-Williams Factor. C =150. C = 150. MECHANICAL. Tensile Strength, psi @ 73°F. 7,450. 7,750. ASTM D638. Tensile Modulus of Elasticity, psi @ 73°F. 420,000. 360,000. ASTM D638. Flexural Strength, psi @ 73°F. 14,450. 13,000. ASTM D790. Flexural Modulus, psi @ 73°F

Chapter 3 - Material Properties - Plastics Pipe Institute

Polyethylene Plastic Pipe and Fittings Materials (4). Certain properties, including stress/strain response, are dependent on a PE's crystalline content. An increase in this phase is reflected by an increase in density. An increase in density affects certain properties, for example an increase in tensile strength and stiffness. Also..

Materials Data Book - MDP

4. Stiffness and strength of unidirectional composites. 5. Dislocations and plastic flow. 5. Fast fracture. 6. Statistics of fracture. 6. Fatigue. 7. Creep. 7. Diffusion. 8. Heat flow. 8. II. PHYSICAL AND MECHANICAL PROPERTIES OF MATERIALS. Melting temperature. 9. Density. 10. Young's modulus. 11. Yield stress and tensile..

PVC Pipe Specifications, Sizes & Pressure Ratings - Professional .

Poisson's Ratio @ 73°F. 0.410. Hazen-Williams Factor. C =150. MECHANICAL. Tensile Strength, psi @ 73°F. 7,450. ASTM D638. Tensile Modulus of Elasticity, psi @ 73°F. 420,000. ASTM D638. Flexural Strength, psi @ 73°F. 14,450. ASTM D790. Flexural Modulus, psi @ 73°F. 360,000. ASTM D790. Compressive Strength..