Aug 22, 2009 . We went with for the decking material, partially because of the conditions here, and partially because it surrounds a built-in hot tub. Three years ago we had a remodel which included the reconfiguring of some of the deck, and you can't tell which boards are new and which are old. Based on the..
Jan 26, 2013 . There is no such thing as a perfect board, every piece of wood is a little warped so as you build you will need to learn to bend and shape wood into . The screws I am using are exterior grade wood screws, drywall screws are very brittle so I don't use those except for drywall because they are cheap.
Sep 17, 2000 . When fastening decking, it's not unusual to come across a board that's warped along its edge--a defect called a "crook." Rather than living with or trying to "persuade" it into place with a hammer, use a little leverage. Take a sharp three-quarter-inch-wide wood chisel, hold it against the edge of the board and..
Jul 3, 2014 . We THOUGHT we would just be able to unscrew the old deck boards and then hopefully reuse them for raised garden beds we want to build this fall. Unfortunately, all the screw were rusted, warped, or stripped so it was basically impossible to pull full deck boards off. We ended up cutting the boards into..
After two years it warped in 3 areas and also was not told that the material gets so hot that it burns your feet. not very enjoyable and in some spots there was mold. I called the manufacturer .. We are very happy with and had planned to replace our large open pressure treated back deck with . Now am wondering if..
Nov 28, 2017 . Doing this will help keep the boards firmly in place and won't give it the freedom to warp or cup. If you already have boards that have cupped . Kerf cuts are small grooves sawed into the underside your deck boards using a circular or table saw to relieve the surface tension. Blade widths are usually 1/8 decking problems - Forum - Bob Vila
Apr 27, 2008 . Is anyone out there still having problems with - not only the product but the company? We started . Elsewhere, the boards warped enough to dislodge an adjacent downpipe. . MY DECK WAS BUILT IN 2001 AND HAS SWELLED SO THERE ARE NO LONGER GAPS BETWEEN THE BOARDS
Save time and money using composite decking to re-plank your existing deck instead of starting from scratch. When an old wooden deck becomes warped, splintered, and rotten, it's easy to re-plank using composite or capped composite decking. Replacing wood decking with decking..
Apr 12, 2016 . Simply put, composite decks are usually crafted from mixing wood fibers with either new and/ or recycled plastics. . Most composite deck boards will be much longer than wooden boards, because there is no fear of warpage. Boards can be . Your composite deck may not warp, but it can sag and buckle
May 18, 2017 . When you are building a new deck, there are many compelling reasons to choose composite decking over wood. Capped composite decking reflects the natural beauty of wood but is far easier to maintain and longer lasting, too. Here at Fiberon we offer several composite decking product lines, each with its..
Jul 31, 2012 . Wood is still the king of decking materials, but the widespread acceptance and availability of manufactured "plastic" lumber has continued to grow . Each year approximately 75 percent of all new decks are covered with pressure-treated (PT) decking. . It has a tendency to swell, crack, split, and warp